- X-Lite Epoxy construction: Brad new lightweight and durable Epoxy technology designed for for performance boards
- Swallow Tail: A widened swallow tail gives more glide in smaller waves
- Concave: Flat entry into a single concave vee for fast rail to rail transitions
- Rocker: Low entry rocker with a longer tail rocker
- Rider ability: Beginner, intermediate, professional
- Suitable conditions: The X-Lite Pod Mod preforms in everything form mushy small beach breaks to super fast reef breaks
- Wave height: 2ft – 6ft
- Fin system: Futures 5 fin setup (Fins not included)
The year 2000 was a huge year for the original Pod, quickly becoming a favorite for surfers everywhere, allowing surfers to surf boards six inches shorter than their regular board revolutionizing punting. The Pod Mod is based off the original Pod with some heavy modifications meaning you can rider this even shorter again. The nose has more volume towards the front to make catching waves a breeze but the extra volume will not sacrifice performance. Catching smaller waves has been made easier with the slightly wider tail, and the original concave has been updated with a flat entry to concave for quick and easy rail to rail transitions.
Experienced surfers should ride this board 3 inch- 6 inch shorter than you are tall.
|5’6 x 20 3/8” x 2 1/2”
|5’10 x 20 7/8” x 2 5/8”
|6’2 x 21 3/8” x 2 3/4”
|6’6 x 21 7/8” x 2 7/8”
Launched in 2012, torq surfboards created a new standard in the epoxy surfboard market, offering an unmatched combination of strength and performance. This year sees the innovation step up a gear, with new shapes, new graphics and new technologies. The torq range now offers 4 types of boards for all levels of surfer.
Torq TEC; Torq Epoxy Composite offers our user friendly performance shapes in our most advanced epoxy lay-up to date. Using a mix of Biaxial, plain weave fibres and Carbon, these boards offer the best strength to weight ratio on the market.
Torq X-Lite is a brand new Epoxy technology developed specifically for performance boards. This is stronger and more Eco than a traditional PU/Polyester board. This new innovative technology is used exclusively on the Channel Islands model, the POD MOD
Torq Epoxy Technology or TET represents a revolution in Epoxy surfboard technology. Built using the latest in EPS/Epoxy materials; the Torq Epoxy Technology combines a lightweight EPS core with Biaxial fibreglass cloth, Epoxy resin and our unique Shield Skin.
Our Soft Deck board uses an additional PE deck skin over a full laminated core to offer a safe first time learning option in this durable easy surfing range.
THERE ARE MANY ASPECTS TO SURFBOARD SELECTION THESE ARE THE POINTS TO CONSIDER
Typically surfboards are measured in inches. The length is measured from the nose to the tail. Choosing the length of the surfboard is dependant on your size (weight, height), board type and waves conditions you wish to use the board for.
The widest point of the surfboard is measured from rail to rail. Generally the wider the surfboard the more stable the board, while a board with smaller width maintains better speed and performance.
Surfboard thickness is measured from the top deck to the bottom. The thickness again has a bearing on the board’s performance. Professional surfers will tend to go for the thinner boards as they are lighter and offer better performance.The thicker boards are stronger and because there is more foam under the surfer the boards are more stable.
The bottom curve of a surfboard. Generally the more rocker the surfboard has the more loose (manoeuvrable) the surfboard will be. Where the flatter rocker surfboards will be faster, although they will lack the looseness. The nose is the tip of the surfboard, the nose can vary in shapes and size. Basically the thinner the nose the more response the board will perform, while wider noses are better for stabilization.
Used to increase the strength of a surfboard, a stringer (normally made from wood) runs down the length of a surfboards (typically in the centre of the board from the tip of the nose to the tail).
Boards built with Epoxy, Carbon Fibre and soft boards generally don’t have stringers.
Generally heavier surfers require larger fins to hold the waves better. Although if you prefer to ride a looser (less hold in the waves), smaller fins would be a better option.
Fin configurations have an effect on the ways your surfboards perform.
The following are some of the more common fin configurations.
The single fin was the original fin configuration for surfboards. Based on the idea of the sailboat keel. Single fins are added stabilization and control on the powerful, larger waves, although lack manoeuvrability
Are great for small waves, being fast and manoeuvrable, but when put into tight spots on larger waves, they become hard to control. Popular with Fish surfboards.
THRUSTER 3 FIN
Widely recognized as the standard fin configuration, the thruster answers the shortcomings of the single fin and the twin fins configurations.
The thrusters give you stabilization, control and manoeuvrability in all types of surfing conditions.
This concept was the brainchild of Australia’s Simon Anderson
QUADS 4 FINS
With four fins in the water, Quads boasts an extraordinary amount of holding power in larger surf.
You may think that having four fins would sacrifice speed by creating more drag, but this is not the case.
The both sets of fins are working together on the rail, which makers believe they creates less drag than a board with a centre fin.
The manoeuvrability isn’t sacrificed either, with fins directly under your back foot, the quads are very responsive.
Similar setup to the Twin Fin, although smaller (low profile) fins are generally placed wider (closer to the rails) on the surfboard.
Popular with Fish and Egg / Retro surfboards.
Heeft u hulp nodig bij uw aankoop? Neem dan gerust contact met ons op
+3170 201 5153