Sale!

Bic Duratec – 5’10 Fish – 2018 model

335.00 265.00

Data specs
Surfer Weight up to 70kg
Length 5’10” / 178 cm
Width 20.50” / 52cm
Thickness 2.60” / 6.5cm
Weight 9.5lbs | 4.30kg
Volume 35L
Fin Set-UP Thruster Tri
Fin Supplied FCS M-5 Thruster
Shaper Peter Pan

Description

5’10″  Fish –  Dynamic performance!

The versatile Pocket Rocket is renowned as the ideal first surfboard for grommets as much as it regarded as an excellent small-wave board for accomplished surfers of approximately 45-70kg. Truly reflecting its name, the Pocket Rocket is a dynamo that offers the stability and buoyancy of a longboard with the manoeuvrability of a shortboard packing a lot of volume into its short length. The secret is its short, fat design that incorporates a wide nose and tail, allowing the Pocket Rocket to catch waves early for a board of its size. While suitable for small children just starting out, it nonetheless packs a punch when ridden by a more experienced surfer.

Brand

BIC Surf

Over 20 years ago BIC Sport launched the first molded production surfboard in the history of the sport. This radical idea opened the sport to tens of thousands of new surfers by offering a winning combination of performance and durability at a reasonable price. For 2018 BIC Surf is excited to offer the most comprehensive range of boards we’ve ever developed, as well as key new features and benefits. Our four board ranges make finding your perfect board easier than ever. Made in France

THERE ARE MANY ASPECTS TO SURFBOARD SELECTION THESE ARE THE POINTS TO CONSIDER

LENGTH

Typically surfboards are measured in inches. The length is measured from the nose to the tail. Choosing the length of the surfboard is dependant on your size (weight, height), board type and waves conditions you wish to use the board for.

WIDTH

The widest point of the surfboard is measured from rail to rail. Generally the wider the surfboard the more stable the board, while a board with smaller width maintains better speed and performance.

BOARD THICKNESS

Surfboard thickness is measured from the top deck to the bottom. The thickness again has a bearing on the board’s performance. Professional surfers will tend to go for the thinner boards as they are lighter and offer better performance.The thicker boards are stronger and because there is more foam under the surfer the boards are more stable.

ROCKER

The bottom curve of a surfboard. Generally the more rocker the surfboard has the more loose (manoeuvrable) the surfboard will be. Where the flatter rocker surfboards will be faster, although they will lack the looseness. The nose is the tip of the surfboard, the nose can vary in shapes and size. Basically the thinner the nose the more response the board will perform, while wider noses are better for stabilization.

STRINGER

Used to increase the strength of a surfboard, a stringer (normally made from wood) runs down the length of a surfboards (typically in the centre of the board from the tip of the nose to the tail).
Boards built with Epoxy, Carbon Fibre and soft boards generally don’t have stringers.

FINS

Generally heavier surfers require larger fins to hold the waves better. Although if you prefer to ride a looser (less hold in the waves), smaller fins would be a better option.

FIN CONSIDERATIONS

Fin configurations have an effect on the ways your surfboards perform.
The following are some of the more common fin configurations.

SINGLE FIN

The single fin was the original fin configuration for surfboards. Based on the idea of the sailboat keel. Single fins are added stabilization and control on the powerful, larger waves, although lack manoeuvrability

TWIN FIN

Are great for small waves, being fast and manoeuvrable, but when put into tight spots on larger waves, they become hard to control. Popular with Fish surfboards.

THRUSTER 3 FIN

Widely recognized as the standard fin configuration, the thruster answers the shortcomings of the single fin and the twin fins configurations.
The thrusters give you stabilization, control and manoeuvrability in all types of surfing conditions.
This concept was the brainchild of Australia’s Simon Anderson

QUADS 4 FINS

With four fins in the water, Quads boasts an extraordinary amount of holding power in larger surf.
You may think that having four fins would sacrifice speed by creating more drag, but this is not the case.
The both sets of fins are working together on the rail, which makers believe they creates less drag than a board with a centre fin.
The manoeuvrability isn’t sacrificed either, with fins directly under your back foot, the quads are very responsive.

KEEL

Similar setup to the Twin Fin, although smaller (low profile) fins are generally placed wider (closer to the rails) on the surfboard.
Popular with Fish and Egg / Retro surfboards.

Heeft u hulp nodig bij uw aankoop? Neem dan gerust contact met ons op

+3170 201 5153
info@noordzeeboardstore.nl

Contact formulier