billabong furnace pro 3.2 mm zipperless wetsuit – black – XL Only


Note: XL Only

The Furnace is Billabong’s premium cold-water wetsuit

3/2 Furnace Pro Zipperless fullsuits are suitable for temperatures 10 to 17 Celcius

Designed specifically for warmth and comfort, utilizing the most advanced materials and construction techniques coupled with an exclusive new ‘Drymax’ entry system the Furnace is built for superior warmth.

Drymax furnace lining is specially engineered irrigation channels that allow both multi-directional stretch and superior drainage.

The air pockets within the channels also trap and retain body heat making it super warm.

Lightweight. Flexible. The Ultimate In High Performance.

  • Drymax Furnace internal lining for quick dry and warmth.
  • Minimal seams for maximum flexibility and stretch.
  • Zipperless construction for a water-tight entry system.
  • Twin needle self tie blind stitch for the most durable blind stitch available.
  • Fused wrist cuff edges for better seal cuffs.
  • silicone grippers that lock wrists and ankles into position, reducing flushing.
  • Contour grip skin collar for chafe free comfort.
  • 3D moulded Supratext knee pads that are pre-bent, durable and flexible.
  • Pre bent back knee for additional comfort.
  • Long sleeve wetsuits.
  • 4/3 Furnace Pro Temp Guide: Cold 10-17 C / 50-62 F.


Ben jij op zoek naar een Billabong furnace pro 4.3 mm zipperless wetsuit? Bij de Noordzee Boardstore hebben wij verschillende pakken van billabong voor je in de aanbieding.

Billabong HISTORY

As a surfer, Gordon saved many a wiped-out surfer from grief when he developed the first leg-rope. Sure, it was a primitive device by today’s standards, but anybody who has had to scramble over the rocks at Burleigh Heads on a big day owes Gordon a schooner.
In 1973 Gordon and Rena Merchant began producing handmade boardshorts under their flat overlooking his beloved Burleigh. They were tough as teak, able to withstand not only the elements, but also able to absorb the sort of punishment that local juniors Guy Omerod and Rabbit Bartholomew would put those first issued trunks through.
From those humble beginnings, Billabong was born.

During the 80’s Billabong went International, firstly exporting to California, Japan, New Zealand and Europe and then finally licensing, but only after each international licensee had achieved Gordon’s benchmark of dedication, honesty and prudent business savvy.
Gordon surrounded himself with some of the finest minds in the industry, both in Australia and abroad, who helped steer the good ship Billabong on a course which would take Billabong to the helm of the world surfing.
In the water, surfers of the calibre of Joe Engel, Mark Occhilupo, Luke Egan, Wayne Bartholomew, Munga Barry, Shane Dorian, Taj Burrows, Sunny Garcia and the late Ronnie Burns have given Billabong international credibility, not to mention Worldwide exposure.
Billabong is involved in many promotions, but one thing that underpins the respect the company enjoys in the marketplace, is Billabong’s commitment to pro boardsports and its team riders. Billabong sponsors many events around the world, with a heavy emphasis on Junior athlete development, but the Jewels in the Crown are The Billabong Pro contests held at Teahupoo, Tahiti and Jeffreys Bay in South Africa.


Billabong Wetsuits

The History Of Australia’s Iconic Surf Brand: Billabong

The iconic Australian surf and lifestyle brand Billabong was started in humble beginnings by Gordon Merchant. The name Billabong is derived from the Wiradjuri word bilabaŋ, which translates to ‘creek that runs only during the rainy season,’ and captures Gordon’s early days where he was found chasing the waves. Here we discover Gordon’s desire for durable garments and his love for boardsports that led his company to success. Ex-Maroubra surfer Gordon Merchant embraced the surfing lifestyle of Australia in the late ’60s and early ’70s, when he would often pack up a Kombi van full of surfboards, maps, sleeping bags, and tents. Gordon traveled along the coast in search of a new surfing utopia. Arriving along a 20-mile stretch of ‘golden beach,’ Gordon made the Gold Coast his home – a place that would allow him to wear boardshorts up to nine months of the year! Throughout his time as a surfer, Gordon created breakthrough inventions that helped shape the everyday surfer. Gordon not only developed a surfboard that featured a tucked-under edge, a detail that helped Michael Peterson and Rabbit Bartholomew become surfing champions, but also developed the first leg-rope. Following this, in 1973, Gordon and his then-partner Rena started producing handmade boardshorts. Making use of a unique triple-stitching technique designed to withstand even the toughest elements, this durable garment was an instant hit amongst the locals.  

Additional information





Typically surfboards are measured in inches. The length is measured from the nose to the tail. Choosing the length of the surfboard is dependant on your size (weight, height), board type and waves conditions you wish to use the board for.


The widest point of the surfboard is measured from rail to rail. Generally the wider the surfboard the more stable the board, while a board with smaller width maintains better speed and performance.


Surfboard thickness is measured from the top deck to the bottom. The thickness again has a bearing on the board’s performance. Professional surfers will tend to go for the thinner boards as they are lighter and offer better performance.The thicker boards are stronger and because there is more foam under the surfer the boards are more stable.


The bottom curve of a surfboard. Generally the more rocker the surfboard has the more loose (manoeuvrable) the surfboard will be. Where the flatter rocker surfboards will be faster, although they will lack the looseness. The nose is the tip of the surfboard, the nose can vary in shapes and size. Basically the thinner the nose the more response the board will perform, while wider noses are better for stabilization.


Used to increase the strength of a surfboard, a stringer (normally made from wood) runs down the length of a surfboards (typically in the centre of the board from the tip of the nose to the tail).
Boards built with Epoxy, Carbon Fibre and soft boards generally don’t have stringers.


Generally heavier surfers require larger fins to hold the waves better. Although if you prefer to ride a looser (less hold in the waves), smaller fins would be a better option.


Fin configurations have an effect on the ways your surfboards perform.
The following are some of the more common fin configurations.


The single fin was the original fin configuration for surfboards. Based on the idea of the sailboat keel. Single fins are added stabilization and control on the powerful, larger waves, although lack manoeuvrability


Are great for small waves, being fast and manoeuvrable, but when put into tight spots on larger waves, they become hard to control. Popular with Fish surfboards.


Widely recognized as the standard fin configuration, the thruster answers the shortcomings of the single fin and the twin fins configurations.
The thrusters give you stabilization, control and manoeuvrability in all types of surfing conditions.
This concept was the brainchild of Australia’s Simon Anderson


With four fins in the water, Quads boasts an extraordinary amount of holding power in larger surf.
You may think that having four fins would sacrifice speed by creating more drag, but this is not the case.
The both sets of fins are working together on the rail, which makers believe they creates less drag than a board with a centre fin.
The manoeuvrability isn’t sacrificed either, with fins directly under your back foot, the quads are very responsive.


Similar setup to the Twin Fin, although smaller (low profile) fins are generally placed wider (closer to the rails) on the surfboard.
Popular with Fish and Egg / Retro surfboards.

Heeft u hulp nodig bij uw aankoop? Neem dan gerust contact met ons op

+3170 201 5153

Contact formulier


    You may also like…