Billabong Womens Wetsuit – 4/3mm Salty Days – Paradise CZ

299.00

Sizes are in European sizes.

Clear

Description

  • Surf Capsule full wetsuit voor dames
  • Stof aan de buitenkant: Superflex Recycler Plus – met 20% meer stretch
  • Neopreen schuim: Superlicht schuim, deels gerecycled
  • Stof aan de binnenkant: Graphene Recycler Plus en Silicon Stretch
  • Vorm: Full suit met lange mouw
  • Dikte: 4/3 mm
  • Instapsysteem: Borstrits
  • Naden buitenkant: Gelijmde en half doorgestikte gesealde naden (GBS) om lekkages te voorkomen
  • Naden aan de binnenkant: Machinaal aangebrachte Super-flex neo tape

Brand

Billabong Wetsuits

The History Of Australia’s Iconic Surf Brand: Billabong

The iconic Australian surf and lifestyle brand Billabong was started in humble beginnings by Gordon Merchant. The name Billabong is derived from the Wiradjuri word bilabaŋ, which translates to ‘creek that runs only during the rainy season,’ and captures Gordon’s early days where he was found chasing the waves. Here we discover Gordon’s desire for durable garments and his love for boardsports that led his company to success. Ex-Maroubra surfer Gordon Merchant embraced the surfing lifestyle of Australia in the late ’60s and early ’70s, when he would often pack up a Kombi van full of surfboards, maps, sleeping bags, and tents. Gordon traveled along the coast in search of a new surfing utopia. Arriving along a 20-mile stretch of ‘golden beach,’ Gordon made the Gold Coast his home – a place that would allow him to wear boardshorts up to nine months of the year! Throughout his time as a surfer, Gordon created breakthrough inventions that helped shape the everyday surfer. Gordon not only developed a surfboard that featured a tucked-under edge, a detail that helped Michael Peterson and Rabbit Bartholomew become surfing champions, but also developed the first leg-rope. Following this, in 1973, Gordon and his then-partner Rena started producing handmade boardshorts. Making use of a unique triple-stitching technique designed to withstand even the toughest elements, this durable garment was an instant hit amongst the locals.  

Additional information

size

8, 6

THERE ARE MANY ASPECTS TO SURFBOARD SELECTION THESE ARE THE POINTS TO CONSIDER

LENGTH

Typically surfboards are measured in inches. The length is measured from the nose to the tail. Choosing the length of the surfboard is dependant on your size (weight, height), board type and waves conditions you wish to use the board for.

WIDTH

The widest point of the surfboard is measured from rail to rail. Generally the wider the surfboard the more stable the board, while a board with smaller width maintains better speed and performance.

BOARD THICKNESS

Surfboard thickness is measured from the top deck to the bottom. The thickness again has a bearing on the board’s performance. Professional surfers will tend to go for the thinner boards as they are lighter and offer better performance.The thicker boards are stronger and because there is more foam under the surfer the boards are more stable.

ROCKER

The bottom curve of a surfboard. Generally the more rocker the surfboard has the more loose (manoeuvrable) the surfboard will be. Where the flatter rocker surfboards will be faster, although they will lack the looseness. The nose is the tip of the surfboard, the nose can vary in shapes and size. Basically the thinner the nose the more response the board will perform, while wider noses are better for stabilization.

STRINGER

Used to increase the strength of a surfboard, a stringer (normally made from wood) runs down the length of a surfboards (typically in the centre of the board from the tip of the nose to the tail).
Boards built with Epoxy, Carbon Fibre and soft boards generally don’t have stringers.

FINS

Generally heavier surfers require larger fins to hold the waves better. Although if you prefer to ride a looser (less hold in the waves), smaller fins would be a better option.

FIN CONSIDERATIONS

Fin configurations have an effect on the ways your surfboards perform.
The following are some of the more common fin configurations.

SINGLE FIN

The single fin was the original fin configuration for surfboards. Based on the idea of the sailboat keel. Single fins are added stabilization and control on the powerful, larger waves, although lack manoeuvrability

TWIN FIN

Are great for small waves, being fast and manoeuvrable, but when put into tight spots on larger waves, they become hard to control. Popular with Fish surfboards.

THRUSTER 3 FIN

Widely recognized as the standard fin configuration, the thruster answers the shortcomings of the single fin and the twin fins configurations.
The thrusters give you stabilization, control and manoeuvrability in all types of surfing conditions.
This concept was the brainchild of Australia’s Simon Anderson

QUADS 4 FINS

With four fins in the water, Quads boasts an extraordinary amount of holding power in larger surf.
You may think that having four fins would sacrifice speed by creating more drag, but this is not the case.
The both sets of fins are working together on the rail, which makers believe they creates less drag than a board with a centre fin.
The manoeuvrability isn’t sacrificed either, with fins directly under your back foot, the quads are very responsive.

KEEL

Similar setup to the Twin Fin, although smaller (low profile) fins are generally placed wider (closer to the rails) on the surfboard.
Popular with Fish and Egg / Retro surfboards.

Heeft u hulp nodig bij uw aankoop? Neem dan gerust contact met ons op

+3170 201 5153
info@noordzeeboardstore.nl

Contact formulier