Hayden Shapes – HyptoKrypto FF – FCS2

819.00979.00

Hayden Shapes Hypto Krypto V FF – FCS2

The Hypto Krypto V surfboard is a variation on the Hayden’s popular tri fin model, and while the shape remains the same, the 5-fin set up allows the board to be surfed as a quad or a thruster.

Hayden adjusted the fin placement on the Hypto V to maximise the overall performance of the convertible set-up, while maintaining the smooth feel that’s become synonymous with this board. The rear fins are quite centralised, and Hayden recommends using the quad rear fin he developed with Futures to fully capitalise on the potential of this model.

Compared to the tri fin, which surfs a little more freely and with nice pivot off the tail, the Hypto V offers a more connected feel to the wave face, with added forward drive and projection. The quad set-up will also feel very smooth down-the-line while encouraging a longer turn on the open face.

The Hypto Krypto continues to be the most versatile shape in the Haydenshapes range, and the 5 fin set-up gives the rider even more options. The outline resembles an old school twin fin in the nose, and when combined with a high amount of volume under the chest, enables it to paddle like a dream and support rider acceleration off the front foot.

Through the back the outline pulls into a rounded pintail creating a lot of curve around the back foot. This not only provides plenty of hold in the bigger stuff, but also allows you to draw tighter arcs in the pocket. The foil also refines out to a thinner, pinched rail to keep the board connected to the wave.

The design of the rocker, which is flat throughout with a little lift in the entry, is focused around speed, enabling surfers to make sections they don’t normally expect to make. The concave runs from a rolled vee in the entry to a slight single, blending into a vee double out the tail, which gives the board great speed and control from rail-to-rail.

Overall the Hypto Krypto V is a one-stop board you can ride around the world having fun in average conditions, as well as taking to the barrel and the open face when the swell pumps!

Clear

Description

5’4″ x 19 1/2″ x 2 1/4″ 26.20 ltr
5’6″ x 19 3/4″ x 2 3/8″ 28.31 ltr
5’8″ x 20″ x 2 1/2″ 31.00 ltr
5’10” x 20″ x 2 5/8″ 33.79 ltr
6’0″ x 20 1/4″ x 2 3/4″ 36.56 ltr
6’2″ x 20 1/2″ x 2 3/4″ 38.39 ltr
6’4″ x 21″ x 3″ 43.23 ltr
6’6″ x 21 1/2″ x 3″ 45.53 ltr
6’8″ x 22″ x 3 1/4″ 51.47 ltr
6’10” x 22 1/2″ x 3 1/4″ 53.96 ltr

Technology

FutureFlex represents the very latest in surfboard technology and design. The construction process combines a stringerless, high-density custom shaped EPS core laminated with biaxial fiberglass, epoxy resin and a parabolic carbon fiber frame.

The carbon fiber frame within the laminate is the key to the performance of these boards. Designed to maximize speed and drive while minimizing twisting, FutureFlex boards essentially store and release energy as the surfer transitions through a turn. The result is a fast and lively, highly responsive surfboard that’s perfectly geared for high performance surfing.

Additional information

size

5'10, 5'11, 5'4, 5'8, 5'9, 6'0, 6'2, 6'4, 6'6, 6'8

THERE ARE MANY ASPECTS TO SURFBOARD SELECTION THESE ARE THE POINTS TO CONSIDER

LENGTH

Typically surfboards are measured in inches. The length is measured from the nose to the tail. Choosing the length of the surfboard is dependant on your size (weight, height), board type and waves conditions you wish to use the board for.

WIDTH

The widest point of the surfboard is measured from rail to rail. Generally the wider the surfboard the more stable the board, while a board with smaller width maintains better speed and performance.

BOARD THICKNESS

Surfboard thickness is measured from the top deck to the bottom. The thickness again has a bearing on the board’s performance. Professional surfers will tend to go for the thinner boards as they are lighter and offer better performance.The thicker boards are stronger and because there is more foam under the surfer the boards are more stable.

ROCKER

The bottom curve of a surfboard. Generally the more rocker the surfboard has the more loose (manoeuvrable) the surfboard will be. Where the flatter rocker surfboards will be faster, although they will lack the looseness. The nose is the tip of the surfboard, the nose can vary in shapes and size. Basically the thinner the nose the more response the board will perform, while wider noses are better for stabilization.

STRINGER

Used to increase the strength of a surfboard, a stringer (normally made from wood) runs down the length of a surfboards (typically in the centre of the board from the tip of the nose to the tail).
Boards built with Epoxy, Carbon Fibre and soft boards generally don’t have stringers.

FINS

Generally heavier surfers require larger fins to hold the waves better. Although if you prefer to ride a looser (less hold in the waves), smaller fins would be a better option.

FIN CONSIDERATIONS

Fin configurations have an effect on the ways your surfboards perform.
The following are some of the more common fin configurations.

SINGLE FIN

The single fin was the original fin configuration for surfboards. Based on the idea of the sailboat keel. Single fins are added stabilization and control on the powerful, larger waves, although lack manoeuvrability

TWIN FIN

Are great for small waves, being fast and manoeuvrable, but when put into tight spots on larger waves, they become hard to control. Popular with Fish surfboards.

THRUSTER 3 FIN

Widely recognized as the standard fin configuration, the thruster answers the shortcomings of the single fin and the twin fins configurations.
The thrusters give you stabilization, control and manoeuvrability in all types of surfing conditions.
This concept was the brainchild of Australia’s Simon Anderson

QUADS 4 FINS

With four fins in the water, Quads boasts an extraordinary amount of holding power in larger surf.
You may think that having four fins would sacrifice speed by creating more drag, but this is not the case.
The both sets of fins are working together on the rail, which makers believe they creates less drag than a board with a centre fin.
The manoeuvrability isn’t sacrificed either, with fins directly under your back foot, the quads are very responsive.

KEEL

Similar setup to the Twin Fin, although smaller (low profile) fins are generally placed wider (closer to the rails) on the surfboard.
Popular with Fish and Egg / Retro surfboards.

Heeft u hulp nodig bij uw aankoop? Neem dan gerust contact met ons op

+3170 201 5153
info@noordzeeboardstore.nl

Contact formulier