Lost Surfboards – Mayhem – Puddle Jumper – 5’8 – 5’10 – 6’0

649.00

COMES WITH FUTURES 5 FIN SETUP

The Puddle Jumper HP is a souped up, slimmed down, re ned Puddle Jumper. It features a pulled in nose with the wide point brought back, and a narrower, pulled in tail block. The new outline enables the PJHP to surf even more like a normal board- a very playful board that’s easy to paddle and ride yet still allows more radical and quick turns than all the other PJ models. It’s easy on the eyes, sleek and re ned under the arm, and its smooth foiled lines deceptively hide its significant volume – with built-in speed to spare. Stand on the tail of this thing and simply go to town, up and down, round and round, like you have a motor in small surf. The tail, with its foiled rails and deep vee, holds in and gives confidence at high speeds. The overall at rocker, generous width, and deep central concave generate small wave squirt like you would expect from a Puddle jumper.

The Puddle Jumper HP can take the domesticated gentleman into a realm thought long gone. Speed, with quickness, fast but loose, precise but playful. If you are one of the thousands of surfers who have enjoyed one of the Puddle Jumper series, the PJHP allows you to take your small wave surfing to the next level.

Clear

Description

Feel free to contact us or let us know what size is perfect for you!

5’8 21.50 2.63 36.80
5’10 22.00 2.75 40.50
6’0 22.25 2.75 42.30

The Puddle Jumper is a con-caved, planing surfacer speeder. Domestic bliss with a twist. Based off the outline of the Bottom Feeder, but with reversed bottom and rocker curves. This board, unlike the past Domestic models (like The Bottom Feeder and RV) features a concave bottom that transitions to vee in the tail. The wide outline makes for easy wave catching and down the line glide and stability. The concave bottom adds lift and increased rail curve, which allows radical top to bottom surfing.

Brand

Lost Surfboards

Additional information

size

5'10, 5'8, 6'0

THERE ARE MANY ASPECTS TO SURFBOARD SELECTION THESE ARE THE POINTS TO CONSIDER

LENGTH

Typically surfboards are measured in inches. The length is measured from the nose to the tail. Choosing the length of the surfboard is dependant on your size (weight, height), board type and waves conditions you wish to use the board for.

WIDTH

The widest point of the surfboard is measured from rail to rail. Generally the wider the surfboard the more stable the board, while a board with smaller width maintains better speed and performance.

BOARD THICKNESS

Surfboard thickness is measured from the top deck to the bottom. The thickness again has a bearing on the board’s performance. Professional surfers will tend to go for the thinner boards as they are lighter and offer better performance.The thicker boards are stronger and because there is more foam under the surfer the boards are more stable.

ROCKER

The bottom curve of a surfboard. Generally the more rocker the surfboard has the more loose (manoeuvrable) the surfboard will be. Where the flatter rocker surfboards will be faster, although they will lack the looseness. The nose is the tip of the surfboard, the nose can vary in shapes and size. Basically the thinner the nose the more response the board will perform, while wider noses are better for stabilization.

STRINGER

Used to increase the strength of a surfboard, a stringer (normally made from wood) runs down the length of a surfboards (typically in the centre of the board from the tip of the nose to the tail).
Boards built with Epoxy, Carbon Fibre and soft boards generally don’t have stringers.

FINS

Generally heavier surfers require larger fins to hold the waves better. Although if you prefer to ride a looser (less hold in the waves), smaller fins would be a better option.

FIN CONSIDERATIONS

Fin configurations have an effect on the ways your surfboards perform.
The following are some of the more common fin configurations.

SINGLE FIN

The single fin was the original fin configuration for surfboards. Based on the idea of the sailboat keel. Single fins are added stabilization and control on the powerful, larger waves, although lack manoeuvrability

TWIN FIN

Are great for small waves, being fast and manoeuvrable, but when put into tight spots on larger waves, they become hard to control. Popular with Fish surfboards.

THRUSTER 3 FIN

Widely recognized as the standard fin configuration, the thruster answers the shortcomings of the single fin and the twin fins configurations.
The thrusters give you stabilization, control and manoeuvrability in all types of surfing conditions.
This concept was the brainchild of Australia’s Simon Anderson

QUADS 4 FINS

With four fins in the water, Quads boasts an extraordinary amount of holding power in larger surf.
You may think that having four fins would sacrifice speed by creating more drag, but this is not the case.
The both sets of fins are working together on the rail, which makers believe they creates less drag than a board with a centre fin.
The manoeuvrability isn’t sacrificed either, with fins directly under your back foot, the quads are very responsive.

KEEL

Similar setup to the Twin Fin, although smaller (low profile) fins are generally placed wider (closer to the rails) on the surfboard.
Popular with Fish and Egg / Retro surfboards.

Heeft u hulp nodig bij uw aankoop? Neem dan gerust contact met ons op

+3170 201 5153
info@noordzeeboardstore.nl

Contact formulier