Modern Longboard – The Boss XB 9’1

729.00799.00

9’1 Modern The Boss PU Blue Tint

With a name like The Boss it’s no surprise this Modern Longboard will have a big influence in any line-up when it comes to catching waves. Essentially, it is designed to be an affordable, user-friendly longboard that’s spec’d appropriately for easy riding with an emphasis on stability, control and smooth turning.

Dimensions Volume Including Fins
8’6″ x 22 1/4″ x 3 1/8″ 66.0 ltr 6″ center with FCS II Sides
9’1″ x 22 3/4″ x 3 3/8″ 78.0 ltr 7″ center with FCS II Sides
Clear
SKU: N/A Categories: , Tags: , , , , ,

Description

OUTLINE: While not too dissimilar to other longboards on the market, The Boss has a very balanced outline, with loads of surface area up front for surfers more capable at nose riding, a parallel mid-section which creates a huge standing zone, and enough taper in the tail to break a line and turn smoothly.

ROCKER: Nice and low through the entry makes for fast paddling, which equates to more waves, tick! Relaxed through the middle, but with enough curve to promote a nice turning arc on the wave face. And finally, there’s a little extra lift in the tail to make turning easier for surfers moving up in their abilities.

CONTOURS: While most performance longboards have complex concaves for rapid movement and response, The Boss has a more simplistic soft vee in the entry and middle, running into vee/double concave through the tail. This is designed to help promote smoother rail-to-rail transitions on a longer board, yet still provide control in steeper sections, and deliver a feeling of pivotal sensitivity when turning right off the tail.

FOIL: Designed with plenty of volume through the nose and tail, and also out towards the rails, providing added stability and making this board simple to ride, regardless of your skill level.

PERFORMANCE: This is the perfect entry level longboard due to the volume allocations, the ease at which it rides, and of course the price. However, more savvy surfers will tap into the true versatile nature of this board and its reliability across so many different types of waves. If you’re a traveller, or just like having one dependable longboard in your quiver, this is it.

CONSTRUCTION: Polyester or PU construction uses traditional materials and laminating techniques to produce a strong, reliable surfboard with high quality finishes. All polyester boards are CNC milled from the shapers files and laminated by hand using quality components such as Hexcel fiberglass, Silmar resin and Bennett foam. For years traditional polyester boards have been at the forefront of performance surfing. These boards feature a progressive flex pattern controlled by a high-grade timber stringer and feel very reliable under your feet. Polyester construction will perform in all surf conditions and can be adapted to suit a wide variety of surfboard models.

Brand

Modern Surfboards

The Modern brand welcomes all surfers and encourages participation and fun. To put it simply, We Love Surfing®. Each model in the Modern range represents a different way to surf, and focuses on novice-to-intermediate surfers wanting an affordable board that’ll not only progress their skills, but maximise their stoke time.

Additional information

size

9'1, 8'6

THERE ARE MANY ASPECTS TO SURFBOARD SELECTION THESE ARE THE POINTS TO CONSIDER

LENGTH

Typically surfboards are measured in inches. The length is measured from the nose to the tail. Choosing the length of the surfboard is dependant on your size (weight, height), board type and waves conditions you wish to use the board for.

WIDTH

The widest point of the surfboard is measured from rail to rail. Generally the wider the surfboard the more stable the board, while a board with smaller width maintains better speed and performance.

BOARD THICKNESS

Surfboard thickness is measured from the top deck to the bottom. The thickness again has a bearing on the board’s performance. Professional surfers will tend to go for the thinner boards as they are lighter and offer better performance.The thicker boards are stronger and because there is more foam under the surfer the boards are more stable.

ROCKER

The bottom curve of a surfboard. Generally the more rocker the surfboard has the more loose (manoeuvrable) the surfboard will be. Where the flatter rocker surfboards will be faster, although they will lack the looseness. The nose is the tip of the surfboard, the nose can vary in shapes and size. Basically the thinner the nose the more response the board will perform, while wider noses are better for stabilization.

STRINGER

Used to increase the strength of a surfboard, a stringer (normally made from wood) runs down the length of a surfboards (typically in the centre of the board from the tip of the nose to the tail).
Boards built with Epoxy, Carbon Fibre and soft boards generally don’t have stringers.

FINS

Generally heavier surfers require larger fins to hold the waves better. Although if you prefer to ride a looser (less hold in the waves), smaller fins would be a better option.

FIN CONSIDERATIONS

Fin configurations have an effect on the ways your surfboards perform.
The following are some of the more common fin configurations.

SINGLE FIN

The single fin was the original fin configuration for surfboards. Based on the idea of the sailboat keel. Single fins are added stabilization and control on the powerful, larger waves, although lack manoeuvrability

TWIN FIN

Are great for small waves, being fast and manoeuvrable, but when put into tight spots on larger waves, they become hard to control. Popular with Fish surfboards.

THRUSTER 3 FIN

Widely recognized as the standard fin configuration, the thruster answers the shortcomings of the single fin and the twin fins configurations.
The thrusters give you stabilization, control and manoeuvrability in all types of surfing conditions.
This concept was the brainchild of Australia’s Simon Anderson

QUADS 4 FINS

With four fins in the water, Quads boasts an extraordinary amount of holding power in larger surf.
You may think that having four fins would sacrifice speed by creating more drag, but this is not the case.
The both sets of fins are working together on the rail, which makers believe they creates less drag than a board with a centre fin.
The manoeuvrability isn’t sacrificed either, with fins directly under your back foot, the quads are very responsive.

KEEL

Similar setup to the Twin Fin, although smaller (low profile) fins are generally placed wider (closer to the rails) on the surfboard.
Popular with Fish and Egg / Retro surfboards.

Heeft u hulp nodig bij uw aankoop? Neem dan gerust contact met ons op

+3170 201 5153
info@noordzeeboardstore.nl

Contact formulier